1·Experience in superconducting magnet tests or complex electronic equipment system tests is desired.
在超导磁体测试和复杂电子设备系统测试方面拥有工作经验。
2·Superconducting magnet system for MHD propulsion research project has been constructed and tested successfully.
本文简单介绍了磁流体船舶推进用超导磁体系统的研制及实验结果。
3·The final major step in fabrication of large superconducting magnet coils is vacuum pressure impregnation (VPI).
大型低温超导磁体线圈制造的最后关键的工艺是真空压力浸渍（VPI）。
4·Structure design and heat transfer analysis for the cryostat of superconducting magnet is mainly discussed in the paper.
介绍了低温超导磁体杜瓦装置的结构设计和传热分析。
5·The magnetic separation superconducting magnet system has simpler structure, thereby having light weight and small size;
这种超层磁体系统结构更简单，因而不但重量轻、体积小；
6·According to experiment result of high temperature superconducting magnet cooled with G-M refrigerator, we researched its key technology problem.
根据高温超导磁体冷却的实验结果，研究了G - M制冷机在磁储能直接冷却应用中的关键技术问题。
7·The optimization of binary current leads is one of the key technology in the low temperature superconducting magnet system directly cooled by refrigerator.
对在两级制冷机传导冷却下由高温超导和铜组成的二元电流引线进行热分析。
8·The present paper summarizes the design, development and test of the D3 superconducting magnet of the toroidal magnet system of the 6D superconducting tokamak.
本文总结了6D超导托卡马克环形磁体系统的D_3超导磁体的设计，研制与试验工作。
9·The calculation shows that the pressure drops and the temperature decreases, but the gas rate increases from liquid helium main dewar to superconducting magnet dewar.
计算结果表明，氦工质从 液氦主杜瓦加注到磁体杜瓦的过程中，其压力和温度不断降低，而 含 气量不断增加。
10·The power supply is an important part of the superconducting magnet system, it affords both steady current and reliable protection for the superconducting magnet system.
电流源及保护控制系统是超导磁体系统的重要组成部分，其主要任务是为超导磁体系统提供稳定电流并实现可靠的保护控制。